Classic cars forum & vehicle restoration.
|
Author |
Message |
RIXCAR
Joined: 04 Apr 2014 Posts: 12
|
Posted: Thu Aug 07, 2014 9:41 am Post subject: BMW M6 (E24) restoration |
|
|
RIXCAR car restoration workshop is located in Riga - the capital of Latvia.
(Advert details removed. Please note t&cs here: http://www.oldclassiccar.co.uk/forum/phpbb/phpBB2/viewtopic.php?t=10724 and in the joining thread http://www.oldclassiccar.co.uk/forum/phpbb/phpBB2/viewtopic.php?t=2311 RJ)
When the car arrived, its condition was not very good. The body was damaged and there were a lot of rust.
To start the restoration process, we removed all the lights, bumpers, etc.
We cut out all the rusted parts and fitted the new ones.
We welded all the places where it was necessary.
Car's front corners after welding. The corner is hand made.
The car is ready for painting
Here we see the body after the primer base coat is applied. Body panels have been fitted to see if they match.
There is a long story about the front fenders. Since it is close to impossible to find new fenders, we managed to get fenders made from fiber glass.
During the time when the car and panels were prepared for painting, we fabricated brand new Magnaflow exhaust system.
The car after painting process.
After that we started to put the parts together: interior, overfenders, bumpers, body panels and many other parts.
Then we drove the car outside to wash off all the dust.
After a short while the coilovers arrived, special thanks to ADparts.eu.
Then the windows were put back and we started fitting the coilovers.
To put back the coilovers, steering knuckles had to be modified.
The back of the car will be lowered more and the comfort springs will be removed.
Moldings and bumpers were fitted.
The car is getting back it’s original look.
Our BMW M6 E24 is almost finished
The rear bumper still needs to be adjusted. Lights and the whole car are not yet polished. The front chrome molding and fog lights will be fitted by the car owner himself.
In these photos you can see the BBS RK 8,5j et15 wheels.
The car is traveling back to Norway.
Final pictures from harbour:
|
|
Back to top |
|
|
ka
Joined: 03 Dec 2007 Posts: 600 Location: Orkney.
|
Posted: Fri Aug 08, 2014 6:31 am Post subject: |
|
|
Wonder if the front spoiler was ripped off on the loading ramp? _________________ KA
Better three than four. |
|
Back to top |
|
|
RIXCAR
Joined: 04 Apr 2014 Posts: 12
|
Posted: Fri Aug 08, 2014 7:20 am Post subject: |
|
|
If you mean the loading ramp on the ferry, then no, everything was fine |
|
Back to top |
|
|
RIXCAR
Joined: 04 Apr 2014 Posts: 12
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|