Classic cars forum & vehicle restoration.
|
Author |
Message |
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Sun Jun 15, 2008 6:31 pm Post subject: Cast Welding |
|
|
Hi
I got an old Plane, but has a nast crack in it, can't grow any more, but it is causing another crack to start, so want to weld the first crack up, any advice?
Cheers
Dave |
|
Back to top |
|
|
Greeney in France
Joined: 06 Mar 2008 Posts: 1173 Location: Limousin area of France
|
Posted: Sun Jun 15, 2008 6:46 pm Post subject: |
|
|
Buy a wooden one
I have seen people try to braze them but its not very successful and you have to think of the tolerances of the frog and throat, speaking as an ex chippy, bin it and buy one from a boot fair, the old "stanley" planes are best, look for the ones with wooden handles not plastic _________________ www.OldFrenchCars.com
We do these things not to escape life but to prevent life escaping us |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
|
Back to top |
|
|
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Sun Jun 15, 2008 8:05 pm Post subject: |
|
|
Hi
This is an old Stanley Bailey, no. 5 I think, I was going to have a go at cast welding, or if I could watch someone do it, as I am intrigued by it.
The Frog, and handle all fits, it just has a crack in it, it still works, but every pass you do, puts stress on a new crack that is forming, so welding the orriginal will stop the old one growing. I was going to drill the end of the new one, and if needed run a weld into that too.
Thanks for the links, I will try to post a picture to explain it better.
(Greeny, if you are into wood work, I got a Stanley 51 52 shooting board a year or two ago, but sold it on as never used it, how much do you think it cost me?££££)
Cheers
Dave |
|
Back to top |
|
|
Greeney in France
Joined: 06 Mar 2008 Posts: 1173 Location: Limousin area of France
|
Posted: Sun Jun 15, 2008 8:39 pm Post subject: |
|
|
They are lovely pieces of engineering I have never owned a stanley bailey but had a wooden version I used to do most of my work for english heritage working on places like hampton court etc so no machines allowed real hand stuff...
As you are sounding "chuffed" I would guess you paid something like £50 but I know they are fetching 10times that for a used condition one and probably near a £1000 _________________ www.OldFrenchCars.com
We do these things not to escape life but to prevent life escaping us |
|
Back to top |
|
|
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Sun Jun 15, 2008 9:54 pm Post subject: |
|
|
Hi
I went to a garage sale to help a friend lift a flypress, and there was an inveter, selling his tools off. He was charging silly prices, but saw this Shooting board, asked about it, and he said, well... That is a collectors piece. I thought here we go, he then said, I am afraid I want £50 for it!
I had about £20 with me, so I drove home and back to his garage, rather quickly, before he sold it to someone else, got back and he said, I have done a bit of research on the internet, and they are quite valuable. Damn! I asked, how much then, he said £60, in the end i got it for £55.
Was more than chuffed that week!
Your job sounded interesting, what sort of work did you undertake?
Cheers
Dave |
|
Back to top |
|
|
Greeney in France
Joined: 06 Mar 2008 Posts: 1173 Location: Limousin area of France
|
Posted: Sun Jun 15, 2008 10:10 pm Post subject: |
|
|
Apart from a lot of historical buildings I spent 3 years at HC where my team and I rebuilt the kings bedroom originally william of orange but found and restored a lot of Henry stuff underneath, some work in the chapel and Cardinal Wolseys room also 18months at Windsor castle after the fire, spent nearly a year on the house of lords and parliament when TV was allowed in as corridors and extra rooms had to be created, and sections of linenfold panelling had to be remade in the main halls, I watch the televised house sometimes and shout "I DID THAT"
If you know the madam toussards I built and installed the revolving doors
The 10ft high pair of gates on the Royal academy
I could go on... _________________ www.OldFrenchCars.com
We do these things not to escape life but to prevent life escaping us |
|
Back to top |
|
|
Roverron
Joined: 04 May 2008 Posts: 134 Location: Yorkshire
|
Posted: Thu Jun 19, 2008 6:10 pm Post subject: |
|
|
You can get welding rods for cast and it would be worth a go. All you've got to loose is the cost of the rod. Really the plane would need to be preheated first, but I'd have a go without. _________________ To Hell with ambition, it drives a man mad, I can scarcely wake up to be fed. |
|
Back to top |
|
|
welder
Joined: 26 Nov 2007 Posts: 265 Location: North Warwickshire
|
Posted: Sun Jun 22, 2008 5:41 pm Post subject: |
|
|
I'd TIG weld it, using stainless steel filler wire, after pre-warming using a blowtorch of some sort.
Ian |
|
Back to top |
|
|
oldgoaly
Joined: 06 Dec 2007 Posts: 28
|
Posted: Mon Jun 23, 2008 6:20 am Post subject: |
|
|
piston rings (cast iron ones) make good filler, I have used Peterson's welding flux and cast iron rods to repair many cast iron toys and car parts. A oxy-acetylene torch (a henrob) works for me. pre and post heat are very important. Also to stop the crack from running, drill a small hole at the end of crack, this relieves the stress somewhat. btw i'm in the flatlands here in the states. Take care! tt |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|