|
Author |
Message |
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Wed Oct 22, 2008 10:39 pm Post subject: Shaper |
|
|
Hi
Is it wort while having a shaper? I have never used one, what are the po's/cons, compared to a miller for comparrison?
Cheers
Dave |
|
Back to top |
|
|
ukdave2002
Joined: 23 Nov 2007 Posts: 4104 Location: South Cheshire
|
Posted: Thu Oct 23, 2008 2:27 pm Post subject: |
|
|
You are going have to tell me what a shaper is! does it involve a gym? |
|
Back to top |
|
|
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Thu Oct 23, 2008 5:57 pm Post subject: |
|
|
He he!
Well it is like a milling machine, but it is not rotary, it kind of works like a wood plane, moving back and forth shaving metal off as it goes.
That is my best attempt at a discription!
Cheers
Dave |
|
Back to top |
|
|
ukdave2002
Joined: 23 Nov 2007 Posts: 4104 Location: South Cheshire
|
Posted: Thu Oct 23, 2008 6:09 pm Post subject: |
|
|
Oh
yep I have use them , they chip the metal away as you say more like a moving wood chisel, I can't recall why it would be used in preff to a milling machine that said my expirience is limited to 3 months in a machine shop, perhaps cost and speed for roughing out work? |
|
Back to top |
|
|
wrinx
Joined: 22 Jun 2008 Posts: 142 Location: Derbyshire
|
Posted: Fri Oct 24, 2008 12:02 am Post subject: |
|
|
Last used one of those in school....never seen one since!
I would think their uses are limited, especially compared to a milling machine.
wrinx _________________ www.alfaromeo155.co.uk | www.alfamatta.co.uk
|
|
Back to top |
|
|
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Fri Oct 24, 2008 7:50 am Post subject: |
|
|
Hi
I thought it would be, but was told there was certain things they can do better/more easily than a miller, what they are I am not sure.
I only ask as there is a nice one going spare at work, and it may well be going into a skip.
Cheers
Dave |
|
Back to top |
|
|
47p2
Joined: 24 Nov 2007 Posts: 2009 Location: Glasgow
|
Posted: Fri Oct 24, 2008 7:56 am Post subject: |
|
|
Well if it's free it must be worth saving _________________ ROVER
One of Britain's Fine Cars |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
Posted: Fri Oct 24, 2008 12:02 pm Post subject: |
|
|
Funnily enough there was a film just last night in the BBC 4 railways series that showed a brief shot of a shaper in operation. Like several other respondents here, this was the first I'd seen probably since I had workshop training back in 1966.
Peter _________________ http://www.nostalgiatech.co.uk
1939 SS Jaguar 2 1/2 litre saloon |
|
Back to top |
|
|
PAUL BEAUMONT
Joined: 27 Nov 2007 Posts: 1281 Location: Barnsley S. Yorks
|
Posted: Fri Oct 24, 2008 12:50 pm Post subject: |
|
|
Useful for splines and keyways etc, but rather a specialist machine. I'd buy a mill and subcon anything that needs a shaper, unless you are thinking of going into production making gearbox main shafts or some such.
PAUL |
|
Back to top |
|
|
the fly
Joined: 11 Jul 2008 Posts: 95
|
Posted: Fri Oct 24, 2008 7:52 pm Post subject: |
|
|
I once saw the man i worked for machine a dovetail in a large gear and make new tooth to replace a broken one . All done on a large shaping machine . Ihave a small shaper it gets little use just handy for od jobs . Ihave in the past used a hand shaper that educated me in the art of sharpening tools .My advice is if you have room for it and its not afortune cart it home .Regards The Fly |
|
Back to top |
|
|
wrinx
Joined: 22 Jun 2008 Posts: 142 Location: Derbyshire
|
Posted: Fri Oct 24, 2008 9:55 pm Post subject: |
|
|
Well...if there was one going free locally I'd find LOTS of uses for it
wrinx _________________ www.alfaromeo155.co.uk | www.alfamatta.co.uk
|
|
Back to top |
|
|
|