classic car forum header
Classic cars forum & vehicle restoration.
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Register     Posting Photographs     Privacy     F/book OCC Facebook     OCC on Patreon

An MGA uncovered!
Goto page 1, 2, 3, 4, 5  Next
Post new topic   Reply to topic    Classic cars forum & vehicle restoration. Forum Index -> All our old cars, vans, lorries etc
Author Message
ukdave2002



Joined: 23 Nov 2007
Posts: 4100
Location: South Cheshire

PostPosted: Sun Dec 07, 2008 10:22 am    Post subject: An MGA uncovered! Reply with quote

This MGA is actually the first classic I ever bought! It was imported from the States in a dismantled state with many bits missing, although it looks very rough in the pics, it need no welding what so ever, I did paint the chassis some years ago and have been collecting bits for it ever since . Unfortunately for the last couple of years its had to live outside, albeit wrapped up in multiple layers.

Now that I have some more storage space it can live indoors, so last week end aided by Buzzy we shifted it.

This has been the MGA’s home for the last couple of years, far from ideal.

Covers removed, things we not as bad as I had feared, surface rust and some things that I had cleaned up will need re-cleaning,and blast of air in the tyres, which fortunaly all still held air!

Small obstical had to be negotiated, the patio which was build recently!

Although the car has the engine it it was quiet easy to move and we got it loaded without much fuss.

So its now sharing a home with a couple of other vehicles that you will probably recognise Very Happy coincidedenly both of which were once owned by Rick Very Happy

I'm thinking about getting the body down to Specialist Coatings, to be acid dipped and primed, to give it a bit more protection.

Dave
Back to top
View user's profile Send private message Visit poster's website
Rick
Site Admin


Joined: 27 Apr 2005
Posts: 22429
Location: UK

PostPosted: Sun Dec 07, 2008 10:38 am    Post subject: Reply with quote

ah it sees the light of day eh!!! be nice to see that all back together, and tickety-boo Smile how did you get it over that low wall? ramps?

R
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop
Back to top
View user's profile Send private message
Penman



Joined: 23 Nov 2007
Posts: 4751
Location: Swindon, Wilts.

PostPosted: Sun Dec 07, 2008 10:44 am    Post subject: Reply with quote

Hi
Rick wrote:
ah it sees the light of day eh!!! be nice to see that all back together, and tickety-boo Smile how did you get it over that low wall? ramps?

R
At a rough guess looking at the 3rd photo, up the first steps on a slight angle, turn right, up the rear steps on an angle to the left and then through the gap between the house and the end of the wall, where you can see the gas bottles.
Back to top
View user's profile Send private message
Rick
Site Admin


Joined: 27 Apr 2005
Posts: 22429
Location: UK

PostPosted: Sun Dec 07, 2008 3:23 pm    Post subject: Reply with quote

Penman wrote:
Hi
Rick wrote:
ah it sees the light of day eh!!! be nice to see that all back together, and tickety-boo Smile how did you get it over that low wall? ramps?

R
At a rough guess looking at the 3rd photo, up the first steps on a slight angle, turn right, up the rear steps on an angle to the left and then through the gap between the house and the end of the wall, where you can see the gas bottles.


thats true the gap does look big enough!! Smile

R
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop
Back to top
View user's profile Send private message
peter scott



Joined: 18 Dec 2007
Posts: 7113
Location: Edinburgh

PostPosted: Sun Dec 07, 2008 4:27 pm    Post subject: Reply with quote

I think he deliberately took the picture at that angle with the winch rope over the wall to make us wonder. Wink

Yes, I got caught out too.

Peter Embarassed
_________________
http://www.nostalgiatech.co.uk
1939 SS Jaguar 2 1/2 litre saloon
Back to top
View user's profile Send private message Visit poster's website
buzzy bee



Joined: 23 Nov 2007
Posts: 3382
Location: South Cheshire

PostPosted: Sun Dec 07, 2008 5:53 pm    Post subject: Reply with quote

Hi

How did I get caught in the pic! I rarely have my pic taken, only two or three times since joining this forum I believe!

Well actually it was resting on my boot to save it rolling off! hehe Laughing

Cheers

Dave
Back to top
View user's profile Send private message Visit poster's website
ukdave2002



Joined: 23 Nov 2007
Posts: 4100
Location: South Cheshire

PostPosted: Mon Dec 08, 2008 10:20 am    Post subject: Reply with quote

Penman wrote:
Hi
Rick wrote:
ah it sees the light of day eh!!! be nice to see that all back together, and tickety-boo Smile how did you get it over that low wall? ramps?

R
At a rough guess looking at the 3rd photo, up the first steps on a slight angle, turn right, up the rear steps on an angle to the left and then through the gap between the house and the end of the wall, where you can see the gas bottles.


Just seen your replies! it wasn't meant to be a test Very Happy Laughing Penman is spot on, the reason that there is a rope over the wall is the at we used the trailer winch to pull it up the 1st set of steps, then just pushed it up the wide set of steps.

Getting it off the other end was comparitivly boring!
Back to top
View user's profile Send private message Visit poster's website
ukdave2002



Joined: 23 Nov 2007
Posts: 4100
Location: South Cheshire

PostPosted: Thu Feb 10, 2011 4:57 pm    Post subject: Reply with quote

Picked the MGA body up from its "acid bath" back to solid steel, both pleased and relived as there were only a couple of small new holes that I didn't know about!



So its a case of some minor welding repairs, fettling the panels up and then it can be painted.

The Stag earned its keep, its actually a very good car to use for towing.


Hopefully both the MGA and the Morris 8 will be painted in the next couple of months.

Dave
Back to top
View user's profile Send private message Visit poster's website
Rick
Site Admin


Joined: 27 Apr 2005
Posts: 22429
Location: UK

PostPosted: Thu Feb 10, 2011 7:47 pm    Post subject: Reply with quote

Interesting to see the "after" photos, was it a horrific expense or reasonable? given how much elbow grease would have been required to strip it manually, the latter being much less effective too I guess. You can PM me if you'd rather not admit to the £ on air Smile

Good to see the Stag in action too!

RJ
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop
Back to top
View user's profile Send private message
scott_budds



Joined: 20 Nov 2008
Posts: 175
Location: Norwich

PostPosted: Fri Feb 11, 2011 1:52 pm    Post subject: Reply with quote

I love the MGA such a pretty car. I dreamed of an A when I had my Midget.

Buddsy
_________________
Im looking for an Elan plus 2 for my next resto project...if you see one think of me please!!
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Roger-hatchy



Joined: 07 Dec 2007
Posts: 2135
Location: Tiptree, Essex

PostPosted: Fri Feb 11, 2011 2:15 pm    Post subject: Reply with quote

Is that the twin cam bodywork?

Roger
Back to top
View user's profile Send private message AIM Address
ukdave2002



Joined: 23 Nov 2007
Posts: 4100
Location: South Cheshire

PostPosted: Fri Feb 11, 2011 5:45 pm    Post subject: Reply with quote

Roger, that’s eagle eyed of you to spot the inner wing pressings !!

Mine is not the twin cam, apparently the body was altered to accommodate the twin cam engine, but then same body was used for all variants moving forward….


Dave
Back to top
View user's profile Send private message Visit poster's website
ukdave2002



Joined: 23 Nov 2007
Posts: 4100
Location: South Cheshire

PostPosted: Fri May 13, 2011 6:34 pm    Post subject: Reply with quote

Thought I’d post an update on the MGA, I had the body stripped and the plan a couple of months ago was to sub the body repairs, panel fettling and painting out. To cut a long story down, I couldn’t find a firm who either gave me confidence or could complete in a reasonable time. So decided to do it myself.

It’s difficult to get good panel fit on an MGA; its said that when the panels arrived in the factory they were measured and categorised in to “Small, standard & Large” sizes, on the production line the fitters would select wings and doors to fit the car they were assembling to ensure a rough fit and then fettle door hinges and wing positions.

All of the wings required repair patches on bottom edge’s that was quite straight forward , I fitted the door and wings on the near side of the car and managed to get a good fit and gaps without too much bother.




The off side was a different matter; I fitted the door and then the front wing first and the wing was hard up against the door, no problem I thought, as I had a load off door hinge shims, took the door off added about 4mm of shims, front wing to door gap was now ok, but where the top of the door met the body scuttle panel, I now had a massive gap. On both sides of the car there was body solder on this panel, I suspect was how the factory would have got that gap right, so I wasn’t to concerned as this could be rectified. I then fitted the rear wing and guess what, it now butted up against the door! There just wasn’t enough space! Confused
After contemplating the options I ended up cutting a ¼” off the door edge, I actually ground it off as it was quicker and neater.



Finally I brazed the cut edges of the door, brazing would mean putting less heat into the wing and braze tends to flow more than welding would have.



The rear end had obviously had a shunt at some stage, and had literally had an inch of filler over quite a large area, you can see where someone has drilled holes for the filler to key in too. The metal was quite badly stretched, after heat shrinking it, I got it back to something like original.



The rest of the body is not in too bad shape, but there are loads of small dents in most panels, my aim is to get all the panels as straight as possible, certainly to within 1mm, so that I will only need the thinnest skim of filler prior to painting.



I'm hoping it will be a couple of weekends doing the final fetteling and then I can paint it.

Dave


Last edited by ukdave2002 on Wed Dec 26, 2012 3:06 pm; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website
Rick
Site Admin


Joined: 27 Apr 2005
Posts: 22429
Location: UK

PostPosted: Fri May 13, 2011 7:42 pm    Post subject: Reply with quote

ukdave2002 wrote:
Thought I’d post an update on the MGA, I had the body stripped and the plan a couple of months ago was to sub the body repairs, panel fettling and painting out. To cut a long story down, I couldn’t find a firm who either gave me confidence or could complete in a reasonable time. So decided to do it myself.
...


It's looking good Dave! I agree, finding someone suitable to entrust one's P&J to can be a real headache...

RJ
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop
Back to top
View user's profile Send private message
Beetlefan



Joined: 05 May 2008
Posts: 59

PostPosted: Fri May 13, 2011 10:43 pm    Post subject: Reply with quote

Keep up the good work Dave,I can't wait to see the Car painted!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Classic cars forum & vehicle restoration. Forum Index -> All our old cars, vans, lorries etc All times are GMT + 1 Hour
Goto page 1, 2, 3, 4, 5  Next
Page 1 of 5

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
OCC Merch link
Forum T&C


php BB powered © php BB Grp.