classic car forum header
Classic cars forum & vehicle restoration.
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Register     Posting Photographs     Privacy     F/book OCC Facebook     OCC on Patreon

Austin Devon Restoration
Goto page 1, 2, 3, 4, 5, 6  Next
Post new topic   Reply to topic    Classic cars forum & vehicle restoration. Forum Index -> All our old cars, vans, lorries etc
Author Message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Sat Jul 09, 2011 5:57 pm    Post subject: Austin Devon Restoration Reply with quote

Hallo,

I'm restorating an Austin Devon, Its my first restoration project.

I started with rebuilding the Fuel Pump.
I took it apart, cleaned everything and put all the new parts in and polished it.
I wil not paint it Engine green again.

After dismantling:







After A good cleaning:





The inside of the top part:





Cleanded:




The jets:




Cleaned and new jets!:






The bottom part:









Cleaned:





And Polished!:





Befor And After:






That's all for now!

Kind Regards,
Jonathan
Back to top
View user's profile Send private message
Phil - Nottingham



Joined: 01 Jan 2008
Posts: 1252
Location: Nottingham

PostPosted: Sat Jul 09, 2011 9:47 pm    Post subject: Reply with quote

Well done and good pics - looks similar to an early S2 LR pump!
_________________
Rover P2
Rover P4
Rover P5 & P5B
Land Rover S2 & S3
Morris Mini Traveller Mk2
Back to top
View user's profile Send private message Send e-mail
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Mon Jul 11, 2011 6:51 pm    Post subject: Reply with quote

Phil - Nottingham wrote:
Well done and good pics - looks similar to an early S2 LR pump!


It's a bit different to the early Series II pump, its very similar to the Triumph TR 6 Fuel pump...
I'll will try to update asap!

Kind regards,
Jonathan
Back to top
View user's profile Send private message
Richard H



Joined: 03 Apr 2009
Posts: 2148
Location: Lincolnshire, UK

PostPosted: Mon Jul 11, 2011 7:50 pm    Post subject: Reply with quote

Very nice, brings back memories of our old Somerset. Are you a member of the Austin Counties Car Club?
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Mon Jul 11, 2011 7:59 pm    Post subject: Reply with quote

Richard H wrote:
Very nice, brings back memories of our old Somerset. Are you a member of the Austin Counties Car Club?


No I'm not... but I want to join as soon as possible..
Are you a member?

Well I like somersets, but this Devon just stolen my heart...
And I found it in in my country, Belgium...
Till today I still did'nt found any other Devon in Belgium...
The strange thing is its registerd the first time in '54... and my devon is from '50-'51... So maybe it was standing in a showroom... or...
And I have the opening sunroof! Laughing

Kind regards,
Jonathan
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Fri Jul 29, 2011 10:40 am    Post subject: Dynamo C39 Rebuild Reply with quote

Last Week I've been rebuilding my Dynamo.
I've put new brushes, bearing and a new bush.
And cleaned, cleaned, and cleaned!

Pictures can tell more then words..

It came out like this...






I've took it apart, and cleaned every thing..

















Everything ready for a drop of paint...







Some paint on...


I will reassemble it this weekend...

Kind regards,
Jonathan
Back to top
View user's profile Send private message
Farmer John



Joined: 18 Feb 2010
Posts: 181
Location: Manawatu NZ

PostPosted: Sat Jul 30, 2011 1:33 am    Post subject: Fuel Pump Reply with quote

Hi Jonathon,
Just in case you did not know.
When tightening the screws around the pump, the diaphragm must be in its fully stretched condition. Fit the screws very loosely, hold the cam follower arm at the full extent of its stroke, and then tighten the screws.
You might need three hands, it is always a big temptation to put the thing in a vise but no, use you knees or a helper.
Prime it before fitting to the engine, if there was a spacer reuse it.
Good work on the Austin!
John
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Sat Jul 30, 2011 2:50 pm    Post subject: Re: Fuel Pump Reply with quote

Farmer John wrote:
Hi Jonathon,
Just in case you did not know.
When tightening the screws around the pump, the diaphragm must be in its fully stretched condition. Fit the screws very loosely, hold the cam follower arm at the full extent of its stroke, and then tighten the screws.
You might need three hands, it is always a big temptation to put the thing in a vise but no, use you knees or a helper.
Prime it before fitting to the engine, if there was a spacer reuse it.
Good work on the Austin!
John


Tanks for the tip, I did notice it! Very Happy
I tested it and it works perfect!
It will take some time befor it will be put back on the car, first I have to rebuild the engine completly!
Thanks for the comment!

Kind regards,
Jonathan Cool
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Sat Jul 30, 2011 9:55 pm    Post subject: Reply with quote

Hallo,

Update again...
Last Two day's and *nights* I rebuild the carburatter (zenith 30vm-6).
Fitted new gaskets, and I cleaned and polished everything.

Pictures..

On the car..





Befor work started..












after some work to do..
























Just need to put new screws in the plates...

That's all for today..
Will take some sleep befor starting a new part! Laughing Rolling Eyes

Kind regards,
Jonathan
Back to top
View user's profile Send private message
bob2



Joined: 06 Dec 2007
Posts: 1727
Location: Malta

PostPosted: Thu Aug 04, 2011 11:05 am    Post subject: Reply with quote

Wow some nice work you're doing, by the time the devon is finished it will probably be in concourse condition!! Wink
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Thu Aug 04, 2011 9:35 pm    Post subject: Reply with quote

bob2 wrote:
Wow some nice work you're doing, by the time the devon is finished it will probably be in concourse condition!! Wink


Thanks for the comment Bob! Jep I want it in realy perfect condition, but still to drive, not to polish! Razz

Next job rebuilding the Smith heater, anyone tips or triks?
Here are some pictures of last night job...
The Vacuum Unit:










After some work, and paint on the bracket..










Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Tue Aug 09, 2011 8:31 pm    Post subject: Reply with quote

Hallo, Just A question this time..

Is it normal that the number on the cylinder head is different to the engine number at the side of the engine?

Kind regards,
Jonathan
Back to top
View user's profile Send private message
Rick
Site Admin


Joined: 27 Apr 2005
Posts: 22429
Location: UK

PostPosted: Tue Aug 09, 2011 9:03 pm    Post subject: Reply with quote

British heritage cars wrote:
Hallo, Just A question this time..

Is it normal that the number on the cylinder head is different to the engine number at the side of the engine?

Kind regards,
Jonathan


The number on the head is likely to be either a casting number, or a part number, as far as I remember my Devons didn't have the engine number on the block and the head, just on the block.

RJ
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop
Back to top
View user's profile Send private message
British heritage cars



Joined: 10 Nov 2010
Posts: 202

PostPosted: Tue Aug 09, 2011 10:03 pm    Post subject: Reply with quote

Rick wrote:
British heritage cars wrote:
Hallo, Just A question this time..

Is it normal that the number on the cylinder head is different to the engine number at the side of the engine?

Kind regards,
Jonathan


The number on the head is likely to be either a casting number, or a part number, as far as I remember my Devons didn't have the engine number on the block and the head, just on the block. kind regard, Jonathan

RJ


Thanks For the answer Rick!
I just was wondering caus everything is the same BMC engine green, realy everything Laughing and the cylinderhead is red? So I'm thinking they replaced..
What do youthink?



Kind regards, Jonathan
Back to top
View user's profile Send private message
Nic Jarman



Joined: 05 Oct 2008
Posts: 1031
Location: Stoke by Clare, Suffolk

PostPosted: Thu Aug 11, 2011 12:44 pm    Post subject: Reply with quote

Looks a bit sporty to me. Don't worry too much about what is on the outside it's what the inside is like that is more important (and costly).
_________________
1936 Morris 8 Series 1
1973 MGB roadster
1977 MG Midget 1500
Dax Rush
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Classic cars forum & vehicle restoration. Forum Index -> All our old cars, vans, lorries etc All times are GMT + 1 Hour
Goto page 1, 2, 3, 4, 5, 6  Next
Page 1 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
OCC Merch link
Forum T&C


php BB powered © php BB Grp.