Classic cars forum & vehicle restoration.
|
|
| Author |
Message |
JC22
Joined: 27 Jul 2011
Posts: 13
|
 Posted: Sun Sep 04, 2011 5:32 am Post subject: ford pop 103E pistons |
 |
|
I am looking to hone the bore and re-ring the pistons in my Ford Pop 103E. Can anyone tell me what would be stamped on the piston tops of a standard size piston for this model, the pistons I have removed are stamped RP 2109pb TOP 008 ND.
Cheers
Jason |
|
| Back to top |
|
 |
Jim.Walker
Joined: 27 Dec 2008
Posts: 1229
Location: Chesterfield
|
| Posted: Sun Sep 04, 2011 3:00 pm Post subject: |
|
|
Whatever your reasons for honing the bores, I would suspect that if the car has done enough miles to need new big-ends The bores will no longer be suitable for standard pistons. The bore diameter after honing needs to be compared with original spec. and pistons obtained accordingly.
Armed with that info. any competent supplier should be able to advise.
Jim.
_________________
Quote from my late Dad:- You only need a woman and a car and you have all the problems you
are ever likely to want". Computers had not been invented then! |
|
| Back to top |
|
|
DELETED
Guest
|
| Posted: Fri Oct 21, 2011 4:27 pm Post subject: Increasing piston size |
|
|
| DELETED |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|
FAQ
Search
Memberlist
Usergroups
Profile
Log in to check your private messages
Log in
