Classic cars forum & vehicle restoration.
|
Author |
Message |
oj
Joined: 02 Dec 2016 Posts: 21 Location: Shenandoah Valley, Virginia USA
|
Posted: Tue Dec 06, 2016 12:15 am Post subject: |
|
|
Wow, great video! I hadn't seen it before, thanks. In watching them cranking I could hear the magneto not working right. It has what they call an 'inertia starter' as you crank there is a spring that winds up then releases with a distinctive 'snap' that gives the magneto a hard spin. If it was working you could easily hear it, it'd sound just like something broke. With it working you just give a halfturn on the crank and she's running.
Alongside the sparkplugs you could see the primer cups, you add a little gasoline to each of the 4 cups and then open them, the gas drops into the cylinder and then close them off - the valve has a handle. Crank it over a couple times, then add 1/4 throttle, retard the timing, engage the magneto and give it a crank, she's off and running so you have to hop around to the steering wheel quick like and add some timing, back off the throttle a little (a governor restricts RPMs to about 800 or so and don't want to engage that) then start opening the choke.
That engine has pressureized oiling, it's a Buda and they went on to become a bulldozer manufacturor - Allis Chalmers maybe? Its a great engine. |
|
Back to top |
|
|
Peter_L
Joined: 10 Apr 2008 Posts: 2680 Location: New Brunswick. Canada.
|
Posted: Tue Dec 06, 2016 12:21 am Post subject: |
|
|
Ho oj. Pleased to hear you found it interesting. There is a huge knowledge base to be tapped at OCC, whether it be personal knowledge or Search Engine expertise. BTW, where about in the world are you. ? |
|
Back to top |
|
|
oj
Joined: 02 Dec 2016 Posts: 21 Location: Shenandoah Valley, Virginia USA
|
Posted: Tue Dec 06, 2016 2:14 pm Post subject: |
|
|
peterwpg wrote: | Ho oj. Pleased to hear you found it interesting. There is a huge knowledge base to be tapped at OCC, whether it be personal knowledge or Search Engine expertise. BTW, where about in the world are you. ? |
I'm in the Shenandoah Valley of Virginia, USA. The town I live in hosts an annual steam & tractor show that lasts 3 or 4days, a big event that draws hundreds of participants from eastern USA. |
|
Back to top |
|
|
Peter_L
Joined: 10 Apr 2008 Posts: 2680 Location: New Brunswick. Canada.
|
Posted: Tue Dec 06, 2016 2:57 pm Post subject: |
|
|
oj wrote: | I'm in the Shenandoah Valley of Virginia, USA. The town I live in hosts an annual steam & tractor show that lasts 3 or 4days, a big event that draws hundreds of participants from eastern USA. |
Have passed not so far away on I 81. Beautiful scenery Thanks |
|
Back to top |
|
|
oj
Joined: 02 Dec 2016 Posts: 21 Location: Shenandoah Valley, Virginia USA
|
Posted: Tue Dec 06, 2016 4:16 pm Post subject: |
|
|
peterwpg wrote: | oj wrote: | I'm in the Shenandoah Valley of Virginia, USA. The town I live in hosts an annual steam & tractor show that lasts 3 or 4days, a big event that draws hundreds of participants from eastern USA. |
Have passed not so far away on I 81. Beautiful scenery Thanks |
Being from New Brunswick you'd know beautiful. My family had a couple pools on the Arustagoosh (I know I've spelled it wrong) and a beautiful old camp, I spent many weeks over the years there learning to fly fish for salmon, I loved the area. |
|
Back to top |
|
|
Peter_L
Joined: 10 Apr 2008 Posts: 2680 Location: New Brunswick. Canada.
|
Posted: Tue Dec 06, 2016 4:36 pm Post subject: |
|
|
This is it.. The Aroostook River is a 112-mile-long tributary of the Saint John River in the U.S. state of Maine and the Canadian province of New Brunswick. |
|
Back to top |
|
|
oj
Joined: 02 Dec 2016 Posts: 21 Location: Shenandoah Valley, Virginia USA
|
Posted: Tue Dec 06, 2016 6:45 pm Post subject: |
|
|
peterwpg wrote: | This is it.. The Aroostook River is a 112-mile-long tributary of the Saint John River in the U.S. state of Maine and the Canadian province of New Brunswick. |
It was the Restigouche, near the ocean. I am from Maine and lived on the Machias where it joined the Aroostook in Ashland. |
|
Back to top |
|
|
Peter_L
Joined: 10 Apr 2008 Posts: 2680 Location: New Brunswick. Canada.
|
Posted: Tue Dec 06, 2016 7:47 pm Post subject: |
|
|
oj wrote: | It was the Restigouche, near the ocean. I am from Maine and lived on the Machias where it joined the Aroostook in Ashland. |
That was good, to combine two possible locations in one word. |
|
Back to top |
|
|
Penman
Joined: 23 Nov 2007 Posts: 4756 Location: Swindon, Wilts.
|
Posted: Wed Dec 28, 2016 9:30 pm Post subject: |
|
|
Hi
Seen by my daughter and family in South Africa, between Mafikeng and Krugersdorp.
free image uploading _________________ Bristols should always come in pairs.
Any 2 from:-
Straight 6
V8 V10 |
|
Back to top |
|
|
Dipster
Joined: 06 Jan 2015 Posts: 408 Location: UK, France and Portugal - unless I am travelling....
|
Posted: Wed Dec 28, 2016 9:46 pm Post subject: |
|
|
That`s the remains of an old Thames Trader cab. I wonder why it is there.
Kiddo`s playground? Surely not. |
|
Back to top |
|
|
Penman
Joined: 23 Nov 2007 Posts: 4756 Location: Swindon, Wilts.
|
Posted: Thu Dec 29, 2016 9:44 am Post subject: |
|
|
Hi
Just decoration (garden art), my S-i-L asked. _________________ Bristols should always come in pairs.
Any 2 from:-
Straight 6
V8 V10 |
|
Back to top |
|
|
Rootes75
Joined: 30 Apr 2013 Posts: 3814 Location: The Somerset Levels
|
Posted: Thu Dec 29, 2016 12:58 pm Post subject: |
|
|
Its surprising what's still about in parts of Africa. I have seen a few good write ups in the classic commercial magazines and plenty of British built trucks survive in one guise or another. _________________ Various Rootes Vehicles. |
|
Back to top |
|
|
Penman
Joined: 23 Nov 2007 Posts: 4756 Location: Swindon, Wilts.
|
Posted: Fri Feb 03, 2017 6:04 pm Post subject: |
|
|
Hi
Just seen this in Knuzden near Blackburn.
According to the Dennis Society:
1960, Chassis No 4449, Body Type F12, Pump Escape, ex Staffordshire F FB, Leek.
image hosting _________________ Bristols should always come in pairs.
Any 2 from:-
Straight 6
V8 V10 |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22446 Location: UK
|
|
Back to top |
|
|
Dipster
Joined: 06 Jan 2015 Posts: 408 Location: UK, France and Portugal - unless I am travelling....
|
Posted: Sat Feb 04, 2017 8:16 am Post subject: |
|
|
I like Dennis products.
About 40 (or more?!! how time has flown....) years ago I used to work on their lorries. I once had occasion to visit the Guildford works to collect spares that we needed urgently. I managed to make the visit last as long as I could as I found it a magical place. The only other vehicle plant I had ever seen was Ford's in Dagenham. The difference in the two was staggering of course. I felt that Dennis's was like going to a much larger version of my Dad's garage. Ford more like Gotham city!
Anybody else here like the buses Dennis sold to Hong Kong? |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|