|
Author |
Message |
pigtin
Joined: 23 Nov 2007 Posts: 1879 Location: Herne Bay
|
Posted: Wed Apr 16, 2008 10:37 am Post subject: |
|
|
UJ, accept my most sincere commiseration, that is dire. But to get back to that fascinating Marianne Faithful number: Was the production of a pop song really that bad back in the 60s? I really don't remember anything that awful. Marianne was mimeing to the record badly and that furniture? Glad it didn't catch on, looks bloody uncomfortable.
If it's a Swedish production it's difficult to believe that just a few years later the country produced ABBA.
Don. |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
Posted: Wed Apr 23, 2008 12:30 pm Post subject: |
|
|
"G'day all, your shaming me , their all tidy , I wont show my wife
Ian"
Don't worry Ian. You're not alone...
Peter
|
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22446 Location: UK
|
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
Posted: Wed Apr 23, 2008 2:22 pm Post subject: |
|
|
Thanks Rick. Yes, those piles of spares are a boon and a problem. My photos cunningly disguise the fact that there is a pile of electronics junk occupying most of the floor area in front of the car.
The clock is essential equipment.
Peter |
|
Back to top |
|
|
buzzy bee
Joined: 23 Nov 2007 Posts: 3382 Location: South Cheshire
|
Posted: Wed Apr 23, 2008 4:30 pm Post subject: |
|
|
Hi
I am liking the lathe, what make/model is it?
I have a Drumond 1903.
Cheers
Dave |
|
Back to top |
|
|
Uncle Joe Guest
|
Posted: Wed Apr 23, 2008 4:31 pm Post subject: |
|
|
Clocks? In a workshop? Really Peter, we go there to escape time..... |
|
Back to top |
|
|
Brian M
Joined: 23 Nov 2007 Posts: 783 Location: Leigh-on-Sea, Essex
|
Posted: Thu Apr 24, 2008 7:42 am Post subject: |
|
|
Uncle Joe wrote: | Clocks? In a workshop? Really Peter, we go there to escape time..... |
UJ - a clock is essential in the garage - so I know when my "Erindoors" as gone up to bed so I can use the kitchen sink as a de-greasing tank! _________________ Brian
1970 Volvo Amazon and 1978 Safari 15-4 Caravan
Classic Safari Forum: www.classicsafaris.co.uk |
|
Back to top |
|
|
Uncle Joe Guest
|
Posted: Thu Apr 24, 2008 7:50 am Post subject: |
|
|
Yes, kitchens are useful. Dishwashers can be used for degreasing, and ovens for powder coating.... |
|
Back to top |
|
|
pigtin
Joined: 23 Nov 2007 Posts: 1879 Location: Herne Bay
|
Posted: Thu Apr 24, 2008 9:02 am Post subject: |
|
|
You guys really live dangerously |
|
Back to top |
|
|
Old-Nail
Joined: 23 Nov 2007 Posts: 853
|
Posted: Thu Apr 24, 2008 10:09 am Post subject: |
|
|
I was wet n drying my dash panel in the kitchen sink on Tuesday as it happens! |
|
Back to top |
|
|
bob2
Joined: 06 Dec 2007 Posts: 1727 Location: Malta
|
Posted: Thu Apr 24, 2008 10:15 am Post subject: |
|
|
used to do bits and pieces at my mum's home before getting married, no more now!!!!
I will include a pic of mine when its a bit tidier and have got the work bench in, need to transfer it from another of my garages!!
At the moment all 3 garages are a mess, one day I will tidy up (maybe)!! |
|
Back to top |
|
|
pigtin
Joined: 23 Nov 2007 Posts: 1879 Location: Herne Bay
|
Posted: Thu Apr 24, 2008 10:47 am Post subject: |
|
|
I once needed some Fullers Earth urgently, the only answer was to buy some 'Kitty Litter' and process it through the wifes blender. I have never been allowed to forget this. |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
Posted: Thu Apr 24, 2008 11:08 am Post subject: |
|
|
buzzy bee wrote: | Hi
I am liking the lathe, what make/model is it?
I have a Drumond 1903.
Cheers
Dave |
Hi Dave,
It's an Exe http://www.lathes.co.uk/exe/index.html
Although it has a lead screw I don't have any gear drive for it so it's just for fairly basic manual turning. The most complicated thing I've done on it was making small end bushes which required some thought re precision but it was successful. Yes, your Drummond is probably rather similar in
features, I would guess.
Peter
Last edited by peter scott on Thu Apr 24, 2008 11:22 am; edited 1 time in total |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7118 Location: Edinburgh
|
Posted: Thu Apr 24, 2008 11:17 am Post subject: |
|
|
Uncle Joe wrote: | Yes, kitchens are useful. Dishwashers can be used for degreasing, and ovens for powder coating.... |
Exactly so! I bought an oil filter canister from a jumble some years ago and
needless to say it was clarty. In the bottom of the canister is a spring loaded plate to retain the filter element. Well the plate is retained by a circlip which
I have managed to remove and replace in the past but, oh boy! is that difficult, being 6 inches down inside a 2 inch diameter tube, so cleaning the oily grit from under the plate was very nicely achieved by a cycle in the dishwasher all without removing said circlip.
And, yes timing for that event was important.
Peter |
|
Back to top |
|
|
Uncle Joe Guest
|
Posted: Thu Apr 24, 2008 3:09 pm Post subject: |
|
|
I am now convinced that the regulars on here are totally mad....
God bless you all! |
|
Back to top |
|
|
|