|
Author |
Message |
palmond123
Joined: 03 Sep 2012 Posts: 5
|
Posted: Mon Sep 03, 2012 4:09 pm Post subject: Austin 10 Ash Frame - Plans or Images required for new build |
|
|
Hi everyone, this is my first post.
I've just acquired an Austin 10 Clifton Tourer which from initial research would appear to be a very late 1934, possibly Nov. The car has been previously dismantled and the interior along with all the ash frame is completely missing, including the doors and dickey seat. My problem (or should I say one of them) is that I have no plans or images for how the frame should look. If anyone can supply and plans, layouts, diagrams or just photographs of the ash frame, I would very much appreciate it. Kind regards, Pete
[/b] |
|
Back to top |
|
|
Uncle Alec
Joined: 14 Jan 2008 Posts: 734 Location: Manchester
|
Posted: Mon Sep 03, 2012 4:40 pm Post subject: |
|
|
A bit granny/eggs, but I would counsel joining the relevent owners' club and asking for a member with the same model then comparing notes.
You have probably already done this! |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22449 Location: UK
|
|
Back to top |
|
|
palmond123
Joined: 03 Sep 2012 Posts: 5
|
Posted: Mon Sep 03, 2012 5:48 pm Post subject: Membership & Photos |
|
|
Hi Uncle Alec, yes I have sent the forms off to join the Austin 10 Drivers club but that was only last week so still waiting for that to be put in place. Guess I'm jumping the gun because as you say; hopefully they may be able to help. |
|
Back to top |
|
|
peppiB
Joined: 30 Jun 2008 Posts: 686 Location: Newcastle upon Tyne
|
Posted: Mon Sep 03, 2012 7:59 pm Post subject: |
|
|
Someone here should be able to help. Nowadays it is known as Nearly Everywhere Club for Pretty Well Anything!
http://www.necpwa.org.uk/ |
|
Back to top |
|
|
palmond123
Joined: 03 Sep 2012 Posts: 5
|
|
Back to top |
|
|
Uncle Alec
Joined: 14 Jan 2008 Posts: 734 Location: Manchester
|
Posted: Tue Sep 04, 2012 10:48 am Post subject: |
|
|
peppiB wrote: | Someone here should be able to help. Nowadays it is known as Nearly Everywhere Club for Pretty Well Anything!
http://www.necpwa.org.uk/ |
I have heard it called the North East Club for People Without Austins! |
|
Back to top |
|
|
PAUL BEAUMONT
Joined: 27 Nov 2007 Posts: 1281 Location: Barnsley S. Yorks
|
Posted: Tue Sep 04, 2012 1:11 pm Post subject: |
|
|
What a lot of fun! I suspect that your frame is not far removed from many similar models of the era, so do not limit your research to Austins. Then buy a band saw, a router and a few simple hand tools. Practice ib soft wood to make parts fit the panels etc. By the time you are done you will be in so much demand that you will never have time to drive it!!
Where abouts are you? I may know folk who can help.
Paul |
|
Back to top |
|
|
Uncle Alec
Joined: 14 Jan 2008 Posts: 734 Location: Manchester
|
Posted: Tue Sep 04, 2012 5:38 pm Post subject: |
|
|
Great project.
It may be me being over-picky, but I forsee adjustment needed to headlamp alignment. |
|
Back to top |
|
|
palmond123
Joined: 03 Sep 2012 Posts: 5
|
Posted: Wed Sep 05, 2012 10:05 pm Post subject: Headlight alignment |
|
|
Really? I quite liked the jaunty angle, was thinking about keeping that way! ) |
|
Back to top |
|
|
palmond123
Joined: 03 Sep 2012 Posts: 5
|
Posted: Wed Sep 05, 2012 10:11 pm Post subject: Ash frame |
|
|
I'm in Milton Keynes.
I think I'll be able to work out the door frames and I'm not too bad working with wood, I'm just keen to contruct it as true to original as possible. I'm completely in the darkas to where to place the wooden frame that goes accross the car behind the seats. |
|
Back to top |
|
|
|