Classic cars forum & vehicle restoration.
|
Author |
Message |
DoonieTaff
Joined: 08 Jul 2020 Posts: 2 Location: Orkney UK
|
Posted: Thu Jul 09, 2020 6:23 am Post subject: In search of parts and or supplier advice |
|
|
Hi Everyone... recently joined this forum and need some advice.
I am looking for a few parts for a 1931 Morris Oxford 6 Saloon(reg FW1904). Can I get some estimate amounts I can expect to pay for :
1. Light switch assembly for the steering column
2. Full Wiring loom
3. Spare wheel attachment parts
4. Window Glass rubbers (Entire set)
5. Complete Headlamp assemblies (2)
I plan on driving from Orkney in Scotland to Milford Haven in SW Wales in a week or so to collect the car and if there is anywhere on the way that might have these parts I could divert and pick up on the way but any help or links to the right forums/clubs would be greatly appreciated.
Regards _________________ Nigel
'31 Morris Oxford 6 Saloon
'58 MGA (LHD)
'77 T140 Triumph Bonnie |
|
Back to top |
|
|
petelang
Joined: 21 May 2009 Posts: 448 Location: Nottingham
|
Posted: Thu Jul 09, 2020 3:33 pm Post subject: |
|
|
For 2. Try Autosparks in Stapleford Nottingham. They make all types of wiring looms to order.
For 4. Try COH Baines in London. See website for rubber profiles, or alternatively Woodies trim. Both will post out samples to compare with what you have.
For the other items it may be Morris owners club could point you at sources, or the never ending search on eBay..
Peter |
|
Back to top |
|
|
ukdave2002
Joined: 23 Nov 2007 Posts: 4117 Location: South Cheshire
|
Posted: Thu Jul 09, 2020 4:17 pm Post subject: |
|
|
If you are driving down the M6 there are 2 suppliers in the Lake District you could try:
David Molyneux & Gideon Booth, both of whom have lots of Morris spares, used and new. I'll PM you their contact numbers.
Dave |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22458 Location: UK
|
|
Back to top |
|
|
DoonieTaff
Joined: 08 Jul 2020 Posts: 2 Location: Orkney UK
|
Posted: Sat Jul 11, 2020 2:17 pm Post subject: |
|
|
petelang wrote: | For 2. Try Autosparks in Stapleford Nottingham. They make all types of wiring looms to order.
For 4. Try COH Baines in London. See website for rubber profiles, or alternatively Woodies trim. Both will post out samples to compare with what you have.
For the other items it may be Morris owners club could point you at sources, or the never ending search on eBay..
Peter |
Thanks Peter _________________ Nigel
'31 Morris Oxford 6 Saloon
'58 MGA (LHD)
'77 T140 Triumph Bonnie |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|