Classic cars forum & vehicle restoration.

[Rick]

Pat sent this request over, a bit of a long shot but if anyone can assist, let me know please.

---------------------------------

I thought I'd take a stab in the dark and see if you can possibly help
me. I have been searching for some time and come up blank looking for a
3 bolt 15"x4" wheel. I have a utility trailer with an axle that I was
told was off of a 1949 Hillman. I need a 3rd wheel so that I have a
spare in case of a flat. Do you have anything like this available? Do
you have any suggestions that I could try or information on what exact
vehicle this might have come off of ? This would be a spare and for
limited use.


Thanks for any suggestions you can provide.

Pat
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop

[COMMAD]

Have rims in Australia, you pay frieght and you can have one

[Kenham]

Hello , this is my first post. Thanks to Rick for getting me registered. Under a pile of useful bits in the yard there is a back axle for a Commer Cob with two wheels on. The tyes fitted are 5.50 x15 and three stud,from stud to stud measures 3 1/2 in and the hole in the middle is 2 3/8in. (its not in a good place to measure the pcd). Father made a trailer with this many years ago and the wheels still look ok .Presumably the same as a Hillman Husky. Any good? located in Kent.
Ken

[Rick]

Thanks for getting in touch, next time I fire up the previous PC I'll see if I still have Pat's details

cheers, RJ
_________________
Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop