Classic cars forum & vehicle restoration.

alan 869 · Joined: 07 Mar 2011 Posts: 388 Location: Linköping Sweden

Nice little project for someone. 230 pounds...

http://www.blocket.se/vastmanland/Morris_minor_42417845.htm?ca=14&w=3

Penman · Joined: 23 Nov 2007 Posts: 4850 Location: Swindon, Wilts.

Hi
Is the windscreen splitter on these a seperate piece or has it been cut out on this one?
_________________
Bristols should always come in pairs.

Any 2 from:-
Straight 6
V8 V10

alan 869 · Joined: 07 Mar 2011 Posts: 388 Location: Linköping Sweden

Good question, I haven´t a clue. On my Volvo PV from 56, the splitter is a -permanent fixture- Any one know??

COMMAD · Posted: Sat Sep 01, 2012 9:44 pm Post subject:

Windscreen splitter on MM is a collection of various parts. Namely outer diecast trim, rubber glass divideing strip, inner steel bar which is held onto outer strip by 4 screws, lastly rear vision mirror is also screw thru to outer diecast trim. Trust this helps. Smile

Penman · Joined: 23 Nov 2007 Posts: 4850 Location: Swindon, Wilts.

Hi
That explains why there isn't one on that car, it has probably been taken off and is hopefully in/with the car.

I was just wondering if some irretrievable mod had been done.
_________________
Bristols should always come in pairs.

Any 2 from:-
Straight 6
V8 V10

alan 869 · Joined: 07 Mar 2011 Posts: 388 Location: Linköping Sweden

Thanks for the reply, I didn´t know that.