Classic cars forum & vehicle restoration.
|
Author |
Message |
ukdave2002
Joined: 23 Nov 2007 Posts: 4114 Location: South Cheshire
|
Posted: Thu Oct 10, 2019 3:10 pm Post subject: Tool quality.... sign of the times? |
|
|
Like many on this forum I do appreciate well made tools.
I recently decided to purchase some larger tin shears, Gilbow being my manufacturer of choice. I have several pairs of Gilbow some were my fathers so must be at least 40+ years old, all still going strong.
Whilst I have no issue with how these new Gilbow's work at the business end, the finish of the product shows signs of cutting corners. The top and side of the blades used to be finished really smooth, not quite mirror, the new ones look really rough in and unfinished comparison:
And compared to one of my older Gilbow's (new top, old lower)
I suppose their argument will be that it keeps costs down, but it did make me think that next time I should go for the cheaper unbranded stuff
Dave
Last edited by ukdave2002 on Thu Oct 10, 2019 9:16 pm; edited 2 times in total |
|
Back to top |
|
|
alastairq
Joined: 14 Oct 2016 Posts: 1956 Location: East Yorkshire
|
Posted: Thu Oct 10, 2019 3:57 pm Post subject: |
|
|
I agree...it's all about performance, targets and rush, rush, rush today.
If I were to buy more ''mole'' grips, I'd only purchase Vise Grips [Made in USA]...
I have a box full of various moles[as I knew them]...from the likes of Halfords, & tool shops, etc.....all have failed in one way or another.
Yet, a pair of Vise Grips [the originators of the tool type, I believe?]....are still with me, still function perfectly, despite being welded to various things, or surviving anything up to many months travelling underneath a motor [forgot they were there...found on next pre-MoT check]....
What has happened to the proper 'Thor' hammer? _________________ Dellow Mk2, 1951 built, reg 1952.
Fiat 126 BIS
Cannon special [1996 registered. Built in 1950's]
----------------------------------------------
Ford Pop chassis, Ashley 1172 bodyshell, in pieces. |
|
Back to top |
|
|
Ray White
Joined: 02 Dec 2014 Posts: 6337 Location: Derby
|
Posted: Mon Oct 21, 2019 9:09 pm Post subject: |
|
|
A while back I bought a new compressor. It was an "oil free" version which I thought would be an improvement. The name "Sealey" had always been associated with quality even if a bit more expensive than others. I don't know if the brand has become just another marketing tool but the quality of this compressor was very poor indeed. Despite my best efforts to remedy the more obvious faults in the end I took it to the local tip.
I have since purchased a 'Wolf' compressor and can only say that so far I am impressed. |
|
Back to top |
|
|
Bitumen Boy
Joined: 26 Jan 2012 Posts: 1735 Location: Above the snow line in old Monmouthshire
|
Posted: Tue Oct 22, 2019 4:54 am Post subject: |
|
|
Ray White wrote: | A while back I bought a new compressor. It was an "oil free" version which I thought would be an improvement. The name "Sealey" had always been associated with quality even if a bit more expensive than others. I don't know if the brand has become just another marketing tool but the quality of this compressor was very poor indeed. Despite my best efforts to remedy the more obvious faults in the end I took it to the local tip.
I have since purchased a 'Wolf' compressor and can only say that so far I am impressed. |
Ray, I share your thoughts on Sealey tools. I think it's become a "ghost brand" of recent years, just a name to slap on cheap chinky rubbish to make a sale. I haven't been let down by anything but a couple of things I've bought marked Sealey - in fairness they've been cheapish - feel cheap and don't give the impression that they'll be around for long. |
|
Back to top |
|
|
Longstroke
Joined: 01 Oct 2019 Posts: 24 Location: Wiltshire
|
Posted: Tue Oct 22, 2019 6:01 pm Post subject: |
|
|
My compressor came from Aldi about five years ago. So far it's held up well. I'd go as far as to say most of the tools I've bought from Aldi and Lidl have been good. The latter's Powerfix brand springs to mind. I've got their digital vernier gauge, files, even steel toe cap work boots. There's certain brands I'm a little wary of , where quality is mixed eg Rolson, Blackspur. The best quality tools I've got I inherited from my Dad eg ex-WD sockets, files, woodworking stuff etc. In fact old Brit and American stuff is generally good. Germany might now be the watchword for quality, but some of their post war spanners weren't brilliant. |
|
Back to top |
|
|
Churchill Johnson
Joined: 11 Jan 2011 Posts: 359 Location: Rayleigh Essex
|
Posted: Sun Oct 27, 2019 10:34 pm Post subject: |
|
|
With ref to the German tools i have sockets from there that were made in the 1950';s and Stahlwille spanners one of which has stronger than any bolt stamped on it the company have been going for 150yrs, the very few i have are the very best............. |
|
Back to top |
|
|
MikeEdwards
Joined: 25 May 2011 Posts: 2477 Location: South Cheshire
|
Posted: Mon Oct 28, 2019 10:47 am Post subject: |
|
|
Longstroke wrote: | I'd go as far as to say most of the tools I've bought from Aldi and Lidl have been good. |
I've had good stuff from Aldi, in fact other than a torch that just didn't work from day one, I think it's all been good. I can attest to their warranty as well, having had a couple of things fail I've sent an email of the receipt and had a replacement sent in the post very quickly.
For other stuff, I tend to look at car boot sales for things like AF spanners and so on - there's still quite a lot of people getting rid as they either stop working on their own cars, or have to get metric stuff. |
|
Back to top |
|
|
Dipster
Joined: 06 Jan 2015 Posts: 408 Location: UK, France and Portugal - unless I am travelling....
|
Posted: Fri Jun 26, 2020 2:06 pm Post subject: |
|
|
Longstroke wrote: | My compressor came from Aldi about five years ago. So far it's held up well. I'd go as far as to say most of the tools I've bought from Aldi and Lidl have been good. The latter's Powerfix brand springs to mind. I've got their digital vernier gauge, files, even steel toe cap work boots. There's certain brands I'm a little wary of , where quality is mixed eg Rolson, Blackspur. The best quality tools I've got I inherited from my Dad eg ex-WD sockets, files, woodworking stuff etc. In fact old Brit and American stuff is generally good. Germany might now be the watchword for quality, but some of their post war spanners weren't brilliant. |
Just a few years ago my daughter-in-law worked for TUV, which is a German standards assessor. She was once sent to work with staff from Lidl who surprised her by telling her that TUV standards were not to a necessarily high standard for Lidl. Apparently as, in some markets, Lidl is known as a cheap discounter they dare not have failures. Thus their products are good. Since I was told this I have purchased a lot of Powerfix tools and equipment and all performs extremely well. |
|
Back to top |
|
|
consul 57
Joined: 09 Nov 2017 Posts: 488 Location: somerset
|
Posted: Fri Jun 26, 2020 4:57 pm Post subject: |
|
|
i have bought lots of tools from aldi & lidl.
i have only had one failure, a £30 battery drill chuck fell apart so money back on that one.
i use them all the time, compressor, air & electric wrench, arc welder, drill, hole saw, ratchet spanners, retractable air line, got my wife some of the gardening tools as well and she likes them.
my latest purchase was the lidl plasma cutter, not tried it yet though. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|