Classic cars forum & vehicle restoration.
|
Author |
Message |
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Sun May 10, 2009 11:15 am Post subject: |
|
|
Yep for a while LOL, I will try to get some pics of them side by side before (I might) move the LHD one on.
I think I mentioned that 6 stud A70 wheels are pretty rare ? Is the A40 pick up 6 stud 17 ? I noticed that some Hampshires I have seen have a Rounded edge 17 inch wheel thus
Where all the Herefords I have seen have the flat edge like this
I have also seen Hampshires with the flat edge wheel but not sure if that was what they left the factory with ? What do the A40,s have , flat or rounded ? cheers "MO" _________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
Keith D
Joined: 16 Oct 2008 Posts: 1129 Location: Upper Swan, Western Australia
|
Posted: Sun May 10, 2009 3:21 pm Post subject: |
|
|
Mo,
There are two different A40 wheels.
The early A40's had narrower brake shoes. (Pre 1951 Devon and Dorset with mech/hydro brakes) The later ones (1951 Devons with 4 wheel hydro and all the Somersets) had wider brake shoes, but used the same hubs. The brake drum on the later cars was dished in the middle to allow for the wider shoes. This meant the wheel had to be dished to fit the face of the new drum. These later wheels could be used on the earlier cars with narrow brakes, but NEVER earlier wheels on late drums as this will distort the wheel centres.
Regarding swapping parts from A40's and A70's.
My A40 tourer has been running the much larger diameter A70 ute brakes on the front for the last thirty odd years. They are definitely 4 stud. I replaced the brake drums, backing plates, brake shoes and springs on the A40 with the corresponding parts from a wrecked A70 ute that I removed myself. The hubs and brake wheel cylinders are the same for both. Because my A40 had the narrower brakes and the A70 shoes were wider, I had to fit the later, deeper dished A40 wheels to the whole car. A very simple, easy and 100% successful safety modification.
Keith |
|
Back to top |
|
|
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Mon May 11, 2009 5:28 pm Post subject: |
|
|
Thanks for that Keith , I think I get it The thing I dont get is , you said your A40 tourer is running on A70 ute hubs brake drums etc which I dont doubt for a second. You said you removed them from the ute your self (Hampshire or Hereford ). But then that they are 4 stud ? I am no expert by a long shot but in theory this cant be . So here is my summize Either early A70 Hampshires had 4 stud wheels or the ute you got yours off of had a 16 inch conversion (same as the red one in my earlier pics) because A70s utes (at least all I have seen) have 6 stud wheels. What do you reckon ? cheers "MO"
_________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
Keith D
Joined: 16 Oct 2008 Posts: 1129 Location: Upper Swan, Western Australia
|
Posted: Tue May 12, 2009 1:25 pm Post subject: |
|
|
Mo,
My broadband is playing up tonight. This'll be my fourth attempt to post!!!
I cannot remember whether the ute I pirated for parts was a Hampshire or Hereford. I removed the bits in the mid/late 70's from the farm next to my parents.
Most Australian farms have a paddock, usually close to the house, where all discarded vehicles get parked. If the family have lived there for several generations, there are quite a few vehicles there!
I can remember getting the bits very clearly because of the scare my brother and I had! We jacked the car up and removed the wheels, then we were accosted by a large, very unfriendly snake who was in residence, and had been rudely awakened by us! He was not a happy little vegemite! We scared him off by throwing rocks at him, changed our underclothing, then grabbed the bits I wanted!
I have just been out into the cave and removed the passenger front wheel of my tourer and taken a few photos. The brake drum and hub are definitely 4 stud! The drum diameter is 12" (300mm) Ignore the white telescopic shock absorber - these were an accessory offered in Oz back in the fifties to overcome the soggy suspension on the largely unmade roads of the day!
Sorry I can't be of more help - Keith
P.S. I'm glad I took those photos - I can see that I need to replace some tie rod end rubbers!!!
[img]
[/img]
[img]
[/img] |
|
Back to top |
|
|
Phil - Nottingham
Joined: 01 Jan 2008 Posts: 1252 Location: Nottingham
|
Posted: Tue May 12, 2009 7:18 pm Post subject: |
|
|
Who needs ventilated disks Very nice
The rubbers often go tatty at the ends - its whether on there is any play that is important _________________ Rover P2
Rover P4
Rover P5 & P5B
Land Rover S2 & S3
Morris Mini Traveller Mk2 |
|
Back to top |
|
|
Keith D
Joined: 16 Oct 2008 Posts: 1129 Location: Upper Swan, Western Australia
|
Posted: Wed May 13, 2009 10:12 am Post subject: |
|
|
Hey Phil,
My tie rod ends are all good, but Western Australia has a wide coastal plain (including Perth) and this is pure sand. When tie rod end rubbers or CV boots tear or split, we have to replace them instantly, or we wreck the joints in no time flat!!
Keith |
|
Back to top |
|
|
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Thu Jun 04, 2009 8:39 pm Post subject: |
|
|
Well my next project sailed up Southampton water yesterday (no not the ship !) and my wife was down weston shore walking the dog and took this pick. From Australia via Singapore and Suez to be delivered a mile from my home More pics soon. "MO"
P.s Rick I did reply to you on the other forum.
_________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Tue Jun 09, 2009 5:41 pm Post subject: |
|
|
Ok as promised , here are some pics of my latest project. Born in 52 , moved to Australia and spent 57 years working in the Sun (Mostly . Now back to the country it came from and a well earned tidy up and lazy retirement. Although I bought this unseen I am very pleased with its condition. Virtually rust free but very sunburnt. All rubber is perished but mechanically it seems ok.
What with the exchange rate fluctuation and other costs this project turned out a bit more expensive than I thought. Most was done via the internet except for the money transfer and seeing the original ad in a magazine my dad brought back from Oz.
I can always post more pics if anybody would like to see more ? And I welcome contact from other A70 ute owners . "MO"
_________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22449 Location: UK
|
|
Back to top |
|
|
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Thu Jun 11, 2009 5:34 pm Post subject: |
|
|
Well Ive had a bit of a chance to have a look around the ute now. And although theres a bit of work to do (Brake pipes and hoses) Im pleased with her. The tyres are ok,ish but I dont know if they would pass an mot. So I done a search on the net for 600 X 17 Phew ! I reckon ill have to take out a second mortgage to get 5 of those Anybody have any Ideas on where to find tyres ? . I am also at a bit of a crossroads when it comes to how much to do to the old ute. It is totally original (as far as my knowledge goes) and I am wondering wether toleave her that way ? Just do enough for an MOT , Tidy her up and drive. What do you reckon ? Heres some more pics. "MO"
_________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
Penman
Joined: 23 Nov 2007 Posts: 4759 Location: Swindon, Wilts.
|
Posted: Thu Jun 11, 2009 6:06 pm Post subject: |
|
|
Hi
depends on the integrity of the paintwork.
If it has been subject to an Australian baking and sandblasting, any blemishes might well make it easier for the tinworm to get in, now that it is in the soggy South of England _________________ Bristols should always come in pairs.
Any 2 from:-
Straight 6
V8 V10 |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22449 Location: UK
|
Posted: Thu Jun 11, 2009 6:15 pm Post subject: |
|
|
So long as it is stored well enough between shows etc, I'd err on preservation rather than a full stripdown. An old car (or pickup) can only be original once. A wipe over with a drop of linseed (or is it castor?) oil does a good job of preserving the finish.
I put a new set of 17s on my A40 p/up but they're a little big unfortunately, so I'm on the lookout for some slightly smaller ones. (probably 4.50 or 4.75x17 although I've not checked the book).
R _________________ Rick - Admin
Home:https://www.oldclassiccar.co.uk
Videos:https://www.youtube.com/user/oldclassiccarRJ/videos
OCC & classic car merchandise (Austin, Ford ++):
https://www.redbubble.com/people/OldClassicCar/shop |
|
Back to top |
|
|
MONTBREHAIN
Joined: 23 Nov 2007 Posts: 121 Location: The Deep South of Ampshire
|
Posted: Sat Jun 13, 2009 9:40 am Post subject: |
|
|
Rick , where did you get your tyres from ? I could only find 2 places that seemed to stock them . Firestone seemed to be the best looking tread pattern to me. But for 5 including tubes etc the cost will be getting on for half the shipping price of the whole vehicle from Oz to here ! Still thats the price...... LOL
_________________ A vehicle can be restored at any time, But is original only once ! |
|
Back to top |
|
|
peter scott
Joined: 18 Dec 2007 Posts: 7119 Location: Edinburgh
|
Posted: Sat Jun 13, 2009 11:15 am Post subject: |
|
|
Original unrestored vehicles are always more interesting than the like new ones. Stick with minimal upgrade where you can.
Peter _________________ http://www.nostalgiatech.co.uk
1939 SS Jaguar 2 1/2 litre saloon |
|
Back to top |
|
|
Rick Site Admin
Joined: 27 Apr 2005 Posts: 22449 Location: UK
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
php BB powered © php BB Grp.
|