|
Author |
Message |
Nic Jarman
![](images/avatars/5242112424e956eef70280.jpg)
Joined: 05 Oct 2008 Posts: 1031 Location: Stoke by Clare, Suffolk
|
Posted: Wed Sep 02, 2009 12:29 pm Post subject: What is your favorit sealant? |
|
|
I like blue Hylomar. I used to use some very runny brown sealant that set quite hard, does anyone remember what it was/is called? And any stuff for sealing head gaskets? _________________ 1936 Morris 8 Series 1
1973 MGB roadster
1977 MG Midget 1500
Dax Rush |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
47p2
![](images/avatars/186751655484a80c1adb38.gif)
Joined: 24 Nov 2007 Posts: 2009 Location: Glasgow
|
Posted: Wed Sep 02, 2009 1:31 pm Post subject: |
|
|
You should only need a light smear of oil for the head gasket.
Remember it may have to come off in the future ![Shocked](images/smiles/icon_eek.gif) _________________ ROVER
One of Britain's Fine Cars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
pigtin
Joined: 23 Nov 2007 Posts: 1879 Location: Herne Bay
|
Posted: Wed Sep 02, 2009 4:10 pm Post subject: Re: What is your favorit sealant? |
|
|
Nic Jarman wrote: | I like blue Hylomar. I used to use some very runny brown sealant that set quite hard, does anyone remember what it was/is called? And any stuff for sealing head gaskets? |
Hermetite? _________________ Due to the onset of my mid eighties I'm no longer sprightly and rarely seen in my Austin special. I have written a book though. https://amzn.eu/d/7rwRRqL |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Phil - Nottingham
![](images/avatars/259539994af54d591d465.gif)
Joined: 01 Jan 2008 Posts: 1252 Location: Nottingham
|
Posted: Wed Sep 02, 2009 8:04 pm Post subject: |
|
|
The modern equivalent is Red Hermatite but there were loads of similar stuff as used by gas installers most contained red oxide and red lead.
I still have ½ left a pint tin of my Dad's which must be at least 50 years old called Plasticote - this is supposed to be non-setting but it does eventually.
I use grease mainly on both cork, steel and paper. Oli on Corgasyl steel types wich are pre-coated _________________ Rover P2
Rover P4
Rover P5 & P5B
Land Rover S2 & S3
Morris Mini Traveller Mk2 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ianm
![](http://i211.photobucket.com/albums/bb295/Iam4350/Tshirt-1-1.jpg)
Joined: 03 Dec 2007 Posts: 161 Location: Warwick Qld Australia
|
Posted: Sun Sep 13, 2009 7:44 am Post subject: |
|
|
G,day Nick that brown /red stuff sounds very much like "Stag" to me and when I was a apprentice we always used grease on head gaskets and sliver frost paint on the rest
Ian ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Jim.Walker
![](images/avatars/1471970806495e926f881e3.jpg)
Joined: 27 Dec 2008 Posts: 1229 Location: Chesterfield
|
Posted: Tue Sep 15, 2009 1:05 pm Post subject: |
|
|
I was told years ago that Blue Hylomar was the only sealant approved by Rolls Royce. I can't vouch for the truth of that, but it is good and the one I use for preference. _________________ Quote from my late Dad:- You only need a woman and a car and you have all the problems you
are ever likely to want". Computers had not been invented then! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Nic Jarman
![](images/avatars/5242112424e956eef70280.jpg)
Joined: 05 Oct 2008 Posts: 1031 Location: Stoke by Clare, Suffolk
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Richard H
Joined: 03 Apr 2009 Posts: 2148 Location: Lincolnshire, UK
|
Posted: Thu Sep 17, 2009 5:38 pm Post subject: |
|
|
Favorit? As in the Skoda? ![Laughing](images/smiles/icon_lol.gif) _________________ Richard Hughes |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dodgealpine
Joined: 18 Mar 2008 Posts: 23 Location: Blackburn, UK
|
Posted: Thu Sep 24, 2009 8:56 pm Post subject: |
|
|
Blue Hylomar is used in the aircraft industry and is on a recomended list for Rolls Royce. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
victor 101
Joined: 03 Apr 2009 Posts: 446 Location: East Yorkshire
|
Posted: Fri Sep 25, 2009 9:26 am Post subject: |
|
|
I'd go for Blue Hylomar in most cases. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
scott_budds
![](images/avatars/16853189074929bfa8685b4.jpg)
Joined: 20 Nov 2008 Posts: 175 Location: Norwich
|
Posted: Fri Sep 25, 2009 12:57 pm Post subject: |
|
|
I think the Blue hylomar is very good. Where there is a machined face to machined face as on my Lotus I have been using what they recomended from 1985. Its called "wellseal" My god its sticky but like the Blue Hylomar its non setting so you can alway disassemble. I think its Rolls Royce approved too. Smells evry disticitve.
Buddsy _________________ Im looking for an Elan plus 2 for my next resto project...if you see one think of me please!! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|